设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
精装书制作方法和工艺流程是怎样的?
作者:admin 来源:http://www.sdhzyw.com 发布时间:2020-9-9 14:13:03 浏览次数:89

  精装书指书籍的一种精致制作方法。精装书籍主要是在书的封面和书芯的脊背、书角上进行各种造型加工后制成的。加工的方法和形式多种多样,如书芯加工就有圆背(起脊或不起脊)、方背、方角和圆角等;封面加工又分整面、接面、方圆角、烫箔、压烫花纹图案等。下面,小编为大家讲解一下精装书的制作方法及工艺。

  Hardback book refers to a delicate method of making books. Hardcover books are mainly made by various modeling processes on the cover, spine and corner of the book block. There are various processing methods and forms, such as round back (ridged or not ridged), square back, square corner and round corner in book block processing; the cover processing is divided into whole face, joint face, square and round corner, hot foil, pressing patterns and patterns, etc. Next, the small editor for you to explain the hardcover book production methods and technology.

  外观

  appearance

  皮壳方正、无污渍、无花痕、无皱、粘贴平实、无起泡、无破损,脊字分中、堵头布长度与厚度相齐不歪斜、圆脊起圆弧度一般情况大于书厚的5~6mm、书脊的弧度与书口弧度相称。

  The leather case is square, no stain, no flower mark, no wrinkle, flat paste, no blister, no damage. The ridge character is divided into two parts, the length and thickness of the blocking cloth are the same without skewness. The arc of the circular ridge is generally greater than 5 ~ 6 mm of the book thickness, and the arc of the book spine is commensurate with the radian of the book mouth.

  内文

  Text

  内文衬纸与皮壳飘口三边位置一致,书芯一般小于皮壳3mm不歪斜,书脊与书口平实,方脊不出现喇叭型、无刀花、切斜,书芯与皮壳中心条位置无跌落,针孔无渗胶,串线无断线、线松、污渍,无大小页、页序乱,帖与帖之间胶水高度1~3mm,无空胶、假粘。

  The position of the inner lining paper is consistent with the three sides of the flap mouth of the case. The book block is generally 3mm smaller than the leather case without skewness. The spine and the mouth of the book are flat and solid. There is no trumpet shaped, knife shaped and oblique cutting on the square ridge. The position of the book block and the center strip of the leather case is not dropped. There is no glue penetration in the pinhole. There is no broken line, loose line, stain, large and small pages and page order disorder. The glue height between the posts is 1 ~ 3mm, and there is no empty glue or false adhesion.

                                            QQ截图20161212180109.jpg

  手感

  feel

  持书有实重感,书槽明显有凹陷感,翻动前后皮壳面180°无吱吱声响,皮壳面书槽与衬纸出现假粘现象 。

  There is a sense of real weight when holding the book, and the book slot is obviously sunken. There is no squeaking sound on the leather case surface before and after turning, and the bookcase groove on the leather case surface and the lining paper appear false sticking phenomenon.

  除上述装订相关工序质量外,打孔两头须居中、孔口平齐、无毛边,收口位为1mm,铁线不超过书芯。这样,给人以不乏现代美感中的纯朴、而更兼有现代工艺中的精致。南京精装书印刷制作公司总是把这些细节处理的很好,让精装书看起来更高档。

  In addition to the above binding related process quality, the two ends of the hole must be in the middle, the hole mouth should be even, no burr, the closing position should be 1 mm, and the iron wire should not exceed the book block. In this way, it gives people not only the simplicity of modern beauty, but also the delicacy of modern technology. Nanjing hardback book printing and production company always deal with these details well to make hardcover books look more upscale.

  总之,一本好的精装书并非偶然所得,制作过程中需各工序质量的严格把关,直到最后工序产品质量完全合格。

  In a word, the quality of the final process is not a strict quality control until the final production process.

  流程共分三条线,即书芯、书封和套合。

  The process is divided into three lines, namely book block, book cover and sleeve.

  书芯加工流程:半成品印张开始→撞页→开料→粘、套页→粘环衬→配页→锁线→半成品检查→压平→堆积压平→切书→捆书→涂黏合剂~→干燥分本→切书→涂黏合剂→扒圆→起脊→涂黏合剂→ 潮湿→粘书签丝带→粘堵头布→涂黏合剂→粘书背布→粘书背纸→涂黏合剂→粘筒子纸。

  Book block processing process: semi-finished product printing start → page collision → material opening → gluing and covering pages → gluing ring lining → page matching → thread locking → semi-finished product inspection → flattening → stacking and flattening → cutting books → binding books → applying adhesive ~ → drying and dividing books → cutting books → applying adhesives → rounding → ridging → applying adhesives → Wet → stick the bookmark ribbon → stick the plug cloth → apply the adhesive → stick the book back cloth → glue the book back paper → apply the adhesive → stick the package paper.

  书封加工流程:计算书封壳各料尺寸→开料→涂黏合剂→组壳→包壳塞角→压平→自然干燥→烫印。

  The processing flow of book cover: calculate the size of each material for sealing the shell → open the material → apply adhesive → assemble the shell → plug angle of the package → flatten → natural drying → hot stamping.

  套合加工流程:涂中缝黏合剂→套壳→压槽→扫衬→压平定型→自然干燥→成品检查→包护封→包装贴标识。

  The nesting process is as follows: coating middle seam adhesive → casing → pressing groove → sweeping lining → flattening and shaping → natural drying → finished product inspection → wrapping and sealing → packaging and labeling.