设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
彩色设计印刷有哪些注意点?
作者:admin 来源:http://www.sdhzyw.com 发布时间:2020-6-9 19:16:37 浏览次数:173

1、印刷尺寸设计

1. Print size design

在彩页印刷尺寸设计时,一般最常见的是A4大小也就是210*285mm,也有180*260mm、214*289mm、184*264mm这样尺寸的,但是需要注意的是,在彩页印刷尺寸设计上一定要注意留够出血尺寸,一般出血尺寸为5mm,这样是为了减少裁切时候的误差,保障彩页印刷质量所需。

In the design of color page printing size, the most common size is A4 size, which is 210 * 285mm. There are 180 * 260mm, 214 * 289mm and 184 * 264mm. However, it should be noted that in the design of color page printing size, enough bleeding size should be reserved, which is 5mm in general, so as to reduce the error during cutting and ensure the quality of color page printing.

2、用色设计

2. Color design

所有颜色只能使用CMYK印刷用色,不得使用RGB或其他色盘标示色。关于重色系,CMYK四颜色总和值不得大于250,否则将会出现色差大并且因为油墨干的慢造成延迟交货或者会出现粘色现象。关于淡色系,CMYK四颜色各值不得低于8,否则可能会印不出。关于黑色文字,只能用K100 C0 M0 Y0。

All colors can only be used for CMYK printing, and RGB or other color plates are not allowed. As for heavy color system, the total value of CMYK four colors shall not be greater than 250, otherwise, there will be large color difference and delayed delivery or color sticking due to the slow drying of ink. As for light color system, CMYK four color values shall not be less than 8, otherwise it may not be printed. For black text, only k100 C0 M0 Y0 can be used.

3、图片设计

3. Picture design

除了美观大方之外,更要注重彩页的实用价值,客户的需求要放在彩页印刷设计的首要位置。另外图片分辨率必须达到350dpi以上,这样才能保证印出来图片保持清晰。网上下载的图片分辨率一般仅为72dpi且为RGB色彩模式,请注意转换CMYK。彩页印刷设计时需要注意哪些问题?

In addition to beautiful and generous, we should pay more attention to the practical value of color pages, and the needs of customers should be placed in the primary position of color page printing design. In addition, the resolution of the image must be more than 350dpi, so as to ensure that the printed image remains clear. Generally, the resolution of the pictures downloaded online is only 72dpi and RGB color mode, please pay attention to the conversion of CMYK. What problems should be paid attention to in the design of color page printing?

QQ截图20161212180043.jpg

4、文字设计

4. Character design

corldraw 制作档案,所有文字必须转成曲线,并注意字间、行间是否有跳行或互叠在一起,笔划间如有漏白点,请加以“打散”即可。另外在用photoshop制作文字时,分辨率达到600dpi以上,这样才不会有毛边,黑文字请用K100填色,勿使用photoshop预设四色黑填色,并做正片叠底,才不会有白边出现。

Cordraw files, all text must be converted into a curve, and pay attention to whether there is a jump between words, lines or overlapping, if there is a leak between strokes, please "break" it. In addition, when using Photoshop to make text, the resolution is more than 600dpi, so there will be no burr. For black text, please fill with k100, do not use Photoshop to preset four-color black fill, and make positive overlay, so there will be no white edge.

5、线条设计

5. Line design

绘制线条或设置外框线的线条宽度,最小值必须在0.076mm以上,否则将可能无法印出。

Draw a line or set the line width of the outer frame line. The minimum value must be more than 0.076mm, otherwise it may not be printed.