设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
输纸吸嘴的调整应注意的一些问题?
作者:admin 来源:http://www.sdhzyw.com 发布时间:2019-6-1 14:31:00 浏览次数:189
输纸吸嘴在印刷中十分的重要,因为他影响着印刷的效率问题,我们在印刷前应该对其进行一些调整,使其达到良好的工作状态。下面济南彩色设计印刷就给大家总结一下输纸吸嘴的调整应注意的一些问题,希望对大家有所帮助!
Paper feeding suction nozzle is very important in printing because it affects the efficiency of printing. We should make some adjustments before printing to make it work well. The following Jinan color design printing to summarize the adjustment of paper feeding suction nozzle should pay attention to some problems, I hope to help you!
分纸吸嘴的风量尽量要小,可以换印刷薄纸用的小孔状皮圈。另外,压纸钢片也要换薄的那一种。
The air volume of the separator suction nozzle should be as small as possible, and the small hole-shaped leather ring for printing thin paper can be replaced. In addition, the paper-pressed steel sheet should be replaced by the thin one.
(1)分纸吸嘴位置要进步,以刚好能吸起一张纸为宜,能调理压纸脚上下的则恰当调高压纸角,以增加分纸吸嘴与纸张的间隔。
(1) Paper separating suction nozzle position should be improved to just suck up a piece of paper, and adjust the high-pressure corner of paper foot to increase the distance between paper separating suction nozzle and paper.
(2)压纸脚与压纸钢片要恰当增加压纸长度,在规范压纸长度的状况下多压1mm。
(2) Press foot and steel sheet should increase the length of press paper properly and press 1 mm more under the condition of standard press length.
(3)纸垛离挡纸舌的位置要比规范状况低一些,以减少纸张往前窜的可能性。
(3) Paper stack is less positioned away from the tongue than the standard condition, so as to reduce the possibility of paper moving forward.
(4)松纸吹嘴与压纸吹嘴的吹风量一定要小,避免吹乱纸张,使能刚好吹起5~10张纸为宜。

(4) The blowing volume of loose paper blowing nozzle and press paper blowing nozzle must be small. It is advisable to avoid disturbing the paper so that it can blow just 5-10 sheets of paper.

济南彩色设计印刷

(5)分纸吸嘴要恰当倾斜,使分纸吸嘴的平面与纸张平行,减少纸张破口现象的发作。
(5) Paper splitting suction nozzle should be properly tilted so that the plane of the paper splitting suction nozzle is parallel to the paper, so as to reduce the occurrence of paper breakage.
(6)递纸吸嘴恰当进步高度,以回程时皮圈不蹭到纸张为宜。
(6) Paper delivery suction nozzle should be properly advanced so that the leather ring should not rub against the paper during the return journey.
(7)侧吹风量要小,吹嘴位置要低,以纸张刚好疏松为宜。
(7) The side blowing volume should be small and the position of the blowing nozzle should be low, so the paper should be just loose.
(8)叼口处两侧的吹风量要恰当加大一点,以吹起20张纸左右为宜,避免因挡纸舌阻挠纸角而形成纸张出褶。
(8) The amount of air blowing on both sides of the mouth should be increased appropriately. It is advisable to blow about 20 sheets of paper to avoid the folding of paper caused by the blocking tongue obstructing the corner of the paper.
(9)及时清算叼口处的纸灰,以免影响光控灵活度,招致机器无故停机。
(9) Clear the paper ash at the mouth in time, so as not to affect the flexibility of light control and cause the machine to stop without reason.
以上的精彩内容由济南彩色设计印刷厂家友情提供,更多的精彩内容请继续关注我们:http://www.sdhzyw.com,我们会有更多的精彩内容等你查看!
The above wonderful content is provided by Jinan color design and printing factory friendship. More wonderful content please continue to pay attention to us: http://www.sdhzyw.com, we will have more wonderful content waiting for you to see!