设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
人造革面书壳的制作方式你知道多少
作者:admin 来源:http://www.sdhzyw.com 发布时间:2017-7-10 18:19:43 浏览次数:683

根据书壳上所包面料的方式可分为整面书壳(包面为一整张料)和接面书壳(包面为两种以上的材料);以包面的材料不同可分为皮面书壳、塑面书壳、布面书壳、PVC涂布面书壳、纸面书壳和贴膜面书壳等;以内衬材料的不同又可分为:硬封、半硬封和软封,还有豪华真皮拉链封等;从包角方式的不同还可分为圆角和方角。

According to the type of fabric bag can be divided into the entire surface of the case (covering for a whole piece of material) and interface type (package surface is more than two kinds of materials); with different package materials can be divided into the leather, plastic, cloth type type type, PVC type, and the coated paper case making paste the membrane surface type; different lining materials can be divided into: hard seal, semi hard seal and soft seal, and luxurious leather zipper seal; from the angle of different ways can be divided into round and square corner.

如皮面书壳在加工中由于其价格的昂贵和原材料形状的不规则,应尽可能利用模具来模切开料,这样既经济也不会使相对柔软的皮面出现压痕。

Such as leather case in the process because of the irregular price of expensive raw materials and shapes, should be possible to use the mold to die cutting, so that both the economy and it will make relatively soft leather indentation.

济南宣传页印刷哪家好

由于皮面书壳的强度大、弹性好,生产时所用的胶料更好为冷胶,这样有助于保持皮面的柔软,不变硬,使其具有较好的手感。真皮书壳在包边、包角之前必须进行削薄处理,以避免叠合隆起。人造革面书壳的制作相比之下要容易得多,但更好也用冷胶。

The type of leather of high strength, good elasticity, rubber material used for the production of the best for cold glue, this helps keep skin soft, not hard, make it a good feeling. The leather case must be thinned before wrapping, wrapping angle, in order to avoid stack up long. Compared to make artificial leather surface type under much more easily, but also the best with cold glue.

布面、PVC涂布面及纸面书壳生产时尽可能使包面纤维顺丝平行于书背,这样既有利于制壳时包面的上胶,又有利于三粘压槽时的压槽成型,且可使封面在压槽时不易因受力而破损。

Cloth, PVC coated paper case making and production as far as possible to make the bag surface along the silk fiber parallel to the back, this is conducive to the shell when the bag surface glue, but also conducive to the three viscous pressure groove forming notching, and the cover is not easy in notching because of stress damage.

接面书壳的制作通常采用人、机合作来完成。首先糊壳机糊制好书壳的中径部分,再根据封面的接面位置,在接面的重叠处用设定好的模具压出一条3~5mm宽的凹线,更后通过手工将前后的封面糊制在线条处,这样既可保证封面接面位置准确而不歪斜,也可避免接面处两层包面材料重叠隆起。

Interface type production usually adopts human machine cooperation to complete. First paste paste machine shell shell diameter book part, according to the cover of the junction position, in the overlap with a set of mold pressure 3 ~ 5mm wide concave line, finally through manual cover paste line at the front and back cover, it can ensure the junction location do not skew, can also avoid the interface layer two covering material overlap uplift.

客户的满意就是对我们的肯定,济南精装书制作欢迎您前来选购我公司的产品,一直以为您提供产品为己任并一直坚持这样做。欢迎您的光临。

Customer satisfaction is our affirmation, Ji'nan hardcover book production welcome you to buy my company's products, has always thought you provide products as their own responsibility, and has always insisted on doing so. Welcome to our company.