设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
亚克力加工处理有哪些主要事项?
作者:admin 来源:http://www.sdhzyw.com 发布时间:2016-1-22 16:45:22 浏览次数:350
1、对于亚克力表面一些轻微划伤或者不太明显的损伤处理,一般采用砂纸湿打磨,在打磨时砂纸要环形移动,砂纸的细度要逐渐增高到600目以上,更后可以采用牙膏擦磨即可。
1, for acrylic surface minor scratches or less obvious injury treatment, generally use sand paper wet grinding, the grinding sandpaper to circular movement, the fineness of sand paper to be gradually increased to more than 600 mesh, can use toothpaste scoured finally can.
2、再生料比新料板材更易溶于有机溶剂,致使雕刻后填漆常常出现银丝裂纹,一般解决办法有下面三种方法:
2, reworked material than new material plate more soluble in organic solvent, which fill paint cracks often appear silver after carving, general solution has the following three ways:
选用丙烯类颜料(树脂类)一般美术店能买到。
Choose acrylic pigments (resin) general art store can buy.
选用氨基油漆,一般化工店能买到。
Choose amino paint, general chemical shop to buy.
填漆后再抛光处理。
Fill paint after polishing processing.
3、板材有静电时易附着灰尘,在丝印或填漆前要用麂皮或沾有1%肥皂水的软布擦干净,以达到清洁的效果。
3, plank with electrostatic easy adherent dust, before fill in screen printing or paint with suede or stained with 1% suds soft cloth to wipe clean, in order to achieve clean effect.