设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
济南书刊杂志印刷讲解浮凸现象产生的方法
作者:济南书刊杂志印刷 来源:http://www.sdhzyw.com 发布时间:2015-9-14 16:10:16 浏览次数:941
在书籍的封面上我们经常看到金色字体或图案,其表现方式是将所需烫金的图案或文字制成凸型版加热,然后在被印刷物上面放置所需颜色的铝箔纸,加压后其铝箔便落至被印刷物上,此种效果奇佳,同时使其铝箔密接在印刷物上,又永不褪色.
On the cover of a book we often see golden characters or patterns, its performance is will be required to bronzing patterns or characters made of convex type plate heating, then the object to be printed above placed the color of the aluminum foil paper, pressure after the aluminum foil fell to the material to be printed on, this effect is good. At the same time, the aluminum foil Tightlock in print, and never fade.
济南书刊杂志印刷:www.sdhzyw.com使用压力方式使纸张产生浮凸现象,一般方法是把凸型放置在乎台上固定,然后稍为加热,凹型由上至下压,则纸张便产生凹凸之形状.有很多情况是商标或图案外缘必须压印成立体凹凸形时,则必须在四边精密套准规线,否则其形态和印刷部分便不能完全吻合.

Jinan magazines printed using pressure relief effect is produced in the paper, the general method is the convex placed care units fixed on, and then slightly heated, the concave type of top-down pressure paper produced concave and convex shape. In many cases the outer edge of the trademark or pattern must imprint founded the concave convex body, it must be in quad precision alignment gauge line, otherwise the morphology and the printing part will not be perfectly.

本文由济南书刊杂志印刷友情提供,更多有关纸张印刷知识请点击:www.sdhzyw.com 我们将竭诚为您服务!