设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态-行业动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
硬壳精装的封面和和蝴蝶精装的方法是一样的
作者:admin 来源:http://www.sdhzyw.com 发布时间:2018-3-21 16:31:42 浏览次数:848
  蝴蝶精装:中间没有缝隙,整个画面(照片或文字)可以充满整个页面,内页全部覆膜,制作成本略高,效果很好,但内页不能很厚。
Butterfly hardcover: there is no gap in the middle. The whole picture (photo or text) can be filled with the entire page, the inside pages are all covered, the cost is slightly higher and the effect is very good, but the inside pages can not be very thick.
硬壳精装:内页如同普通胶装可以做成很厚的册子,外壳如同蝴蝶精装的精美,制作成本不会很高,内页可装很厚,效果挺好。不同点和相同点:
Hard shell hardcover: inside pages, like ordinary glue, can make very thick pamphlets. The shell is like the finely decorated butterfly. The cost of production is not very high, the inside pages can be very thick, and the effect is very good. Different points and the same points:

硬壳精装的封面计算的方法和蝴蝶精装的方法是一样的,只是压槽处大小不一样(硬壳精装压槽处是5mm,蝴蝶精装压槽处是10mm)

济南精装书制作

The hard shell hardcover calculation method is the same as that of the butterfly hardcover, but the size of the pressure groove is different. (the hard shell press slot is 5mm, the butterfly finish press slot is 10mm).
精装需要了解掌握的知识点(根据上图客户给的封面大小等信息总结)
The hardcover needs to know the knowledge of the knowledge (according to the cover size and other information given by the customer.)
平面剖析展示图如下:
The plane analysis display is as follows:
注:上图平面剖析展示图中紫色部分为后期贴灰板位置:大小分别为207*293mm、18*293mm、207*293mm
Note: the purple part of the above figure is the post ash board position: 207*293mm, 18*293mm, 207*293mm, respectively.
蝴蝶精装封面计算方法为:
The calculation method of butterfly cover cover is:
封皮宽:20(外包边左边20mm)+207(内文尺寸宽210mm左右共减3mm)+10(压槽背面10mm)+18(书脊=书心厚度12mm+上下荷兰灰版各3mm)+10(压槽正面10mm)+207(内文尺寸210mm左右共加3mm)+20(外包边右边20mm)
Cover width: 20 (left side 20mm +207 (outsourcing) text width is about 210mm a total reduction of 3mm) +10 (10mm +18 (back pressure groove) = thickness of 12mm+ on the heart of the book spine Holland version of the 3mm +10 (ash) positive pressure tank 10mm) +207 (text size of about 210mm total +20 (3mm) outsourcing side right 20mm)
封皮高:20(外包边上边20mm)+293(内文尺寸高285mm上下共加4mm)+20(外包边下边20mm)
Cover: 20 (high above 20mm +293 (outsourcing side) text size high on a total of 285mm plus 4mm (20mm) +20 outsourcing side below)
由此,我们得出封皮大小尺寸应制作为:宽492*高333mm
Thus, we conclude that cover size should be as: width 492* height 333mm
注:硬壳精装和蝴蝶精装计算方法一样,就是将压槽处10mm设置成5mm计算即可
Note: the hard shell hardcover is the same as the butterfly finish calculation method, which is to set the 10mm at the pressure slot into 5mm calculation.
以上便是济南精装书制作今天的分享,您还满意吗,欢迎关注我们的网站:http://www.sdhzyw.com并且关注我们的产品,我们将为您提供优良的产品,衷心的愿与您建立合作关系。
The above is Ji'nan's hardcover book production today's sharing. Are you satisfied? Welcome to our website: http://www.sdhzyw.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.