设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态-行业动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
墨色调试是宣传页印刷的重要步骤
作者:admin 来源:http://www.sdhzyw.com 发布时间:2017-12-13 17:22:00 浏览次数:770
  首件检验更核心的工作是校对图文内容和确定墨色,首件如果没有得到相关人员的签字复核,胶印机台不得批量生产。
First piece inspection work is the core of the proofreading graphic content and determine the first piece of ink, if you do not get signed review of relevant personnel, not mass production of offset printing machine.
①核对生产指令单。生产指令单对生产工艺要求、产品质量标准和客户的特殊要求都有详细的说明。
(1) check the production orders. The production instructions have a detailed description of the requirements of the production process, the quality standard of the products and the special requirements of the customers.

②印版的检查和复核。印版质量的好坏直接关系到印刷品是否符合客户的质量要求,所以印版内容必须与客户来样内容一致,不得有任何差错。

济南宣传页印刷

Examination and review of the printing plate. The quality of the printing plate is directly related to whether the printed matter meets the quality requirements of the customers. Therefore, the contents of the printing plates must be consistent with the contents of the customers, so there must be no mistakes.
③纸张、油墨的检查。不同印刷品对纸张要求不同,应检查其与客户要求是否一致。另外,专色油墨的调配精确度是还原样稿颜色的关键,在油墨检查工作中应加强此项工作。
(3) inspection of paper and ink. Different printed materials require different paper and should check whether they are consistent with the customer's requirements. In addition, the deployment of spot color ink is the key to reducing the accuracy of sample color, ink in the inspection work should be strengthened in this work.
(2)调试工作
(2) debugging work
①设备调试。输纸、走纸、收纸的正常运行和水墨平衡的稳定是生产出符合标准的印刷品的前提,切忌在设备边调整边开机的状态下进行首件签样。
(1) equipment debugging. The normal operation of paper feeding, paper delivery and paper collection and the stability of ink and wash balance are the premises for producing printed products that conform to the standard.
②墨色调试。一件符合样张墨色的印刷品必须经过多次调试印刷,但要避免油墨称量不精确或为接近样稿墨色而随意添加墨量的现象。每次调配墨色必须做到重新称量,同时将设备调至预生产状态,保证其随时可投入正常生产。
The ink debugging. A printing ink must conform to the sample after several debugging to avoid ink printing, but not exact or close to the sample weighing and ink add ink phenomenon. Every time the deployment of ink must be re weighed, while the state of the equipment to ensure its pre production, ready to be put into normal production.
(3)首件签样
(3) the first piece
机台领机在首件签样印刷结束后,应对首件进行复核校对,无误后签名交班组长和质检员签名确认,并挂在看样台上作为正常生产的检验依据。只有首件签样后,方可批量生产。
The machine in the first piece samples after printing, should first check the proofreading, correct sign shift leader and inspector signature confirmation, and hung on the sample bench as the normal production of the test basis. Only when the first piece is signed, it can be produced in mass.
本文的精彩内容来自济南宣传页印刷详细内容请点击我们的官方网站:http://www.sdhzyw.com谢谢您的到来!
The wonderful content of this article comes from the detailed content of the Ji'nan publicity page, please click on our official website: http://www.sdhzyw.com thank you for your arrival!