设为首页 | 加入收藏 | 联系我们
产品分类
当前位置:首页 - 新闻动态-行业动态
新闻动态
联系我们
济南华政印务有限公司
地址:济南市历城区工业北路161-1号华政印务
电话:0531-88771456
手机:13698644688
邮箱:371162023@qq.com
传真:0531-80992585
联系人:万经理
精装书工艺流程和相关注意事项
作者:admin 来源:http://www.sdhzyw.com 发布时间:2017-9-1 16:47:51 浏览次数:658

一、精装书制作需要注意的事项

First, hardcover book production should pay attention to matters

1、精装本由于是分别完成,封面和书芯的颠倒差错率高!要求印厂要特别注意,更好是合同中写明质量标准。

1, hardcover, due to the completion of the book cover and book upside down, high rate of error! Requirements of factories should pay special attention to the best quality standard is stated in the contract.

2、设计封面时,要留下封面、封底折槽的尺寸和硬纸板的厚度尺寸。印刷厂委托设计公司设计封面,他们一时大意,将平装本、精装本(我那本书各出版五千册)尺寸按一个设计。结果印厂也不注意,就那样印制了一万张。结果到了总装时,才发现了这个问题。既耽误了工期,也造成了损失。

2. When designing the cover, leave the size of the cover, the back cover, the groove and the thickness of the cardboard. The printing company commissioned the design company to design the cover, and they were careless about the time, and put the paperback and hardback copies (five thousand copies of my book) in a design. The factory does not pay attention, as printed ten thousand copies. As a result, the problem was discovered at the time of assembly. Not only delayed the construction period, but also caused losses.

二、精装书工艺流程

Two, hardcover book process

制作精装书的工艺流程共分三条线,即书芯、书封和套合。

精装书制作多少钱

Process of making hardcover book is divided into three lines, namely, the book and Book cover.

书芯加工流程:半成品印张开始→撞页→开料→粘、套页→粘环衬→配页→锁线→半成品检查→压平→堆积压平→切书→捆书→涂黏合剂~→干燥分本→切书→涂黏合剂→扒圆→起脊→涂黏合剂→潮湿→粘书签丝带→粘堵头布→涂黏合剂→粘书背布→粘书背纸→涂黏合剂→粘筒子纸。

Bookblock processing process: semi-finished products to hit the open page to start printing material, glue, set to stick to page to page paper, semi-finished product inspection, sewing, packing, cutting applanation applanation, bundling, and drying the coated adhesive to cut, binder, coating, rounding, ridge, James binder, wet, sticky, sticky ribbon bookmark plug for cloth, coated adhesive, sticky back cloth, paper, coated adhesive, sticky back stick paper cone.

书封加工流程:计算书封壳各料尺寸→开料→涂黏合剂→组壳→包壳塞角→压平→自然干燥→烫印。

Bookjacket process: the size of the envelope calculations to open material, coating binder, shell, Shell Group, flat, angle plug natural drying, hot stamping.

套合加工流程:涂中缝黏合剂→套壳→压槽→扫衬→压平定型→自然干燥→成品检查→包护封→包装贴标识。

Set the process: coating binder, casing pressure, raphe groove to sweep the liner, shaping, drying, pressing natural product inspection, labeling and packaging jacket.

本文的精彩内容来自济南精装书制作详细内容请点击我们的官方网站:http://www.sdhzyw.com/谢谢您的到来!

The wonderful content of this article comes from Ji'nan hardcover books. Please click on our official website: http://www.sdhzyw.com/, thank you for coming!